Kyocera KD135SX - 135 Watt, 12 Volt Solar Panel (Junction Box)
The Kyocera KD135SX-UPU is almost identical to the KD135GX-LPU except is has a standard screw terminal junction box instead of the MC4 connector cables. This panel replaces the older KC/KD-125 and 130's. This is the largest solar panel that can ship UPS.The Kyocera KD135SX is one of the few higher power solar panels still available with a junction box, rather than the MC4 cables. The KD series junction box versions all have a 4" x 4" junction box with screw terminals on the back of the panel for wiring. This is a standard 12 volt panel suitable for almost any environment or application. Ships UPS. This panel replaces the older KC-125 and KC-130 panels but has a slightly
different and heavier frame size.New frame technology allows for end mounting under 2400 Pa (50 psf) or wind speeds of 130 mph (ASTM E1830) and traditional mounting under 5400 Pa (113 psf) to support increased snow load.
- UV stabilized, aesthetically pleasing black anodized frame
- Supported by all major mounting structure manufacturers
- Easily accessible grounding points on all four corners for
fast installation
- Proven junction box technology
These cells are encapsulated between a tempered glass cover
and a pottant with back sheet to provide efficient protection
from the severest environmental conditions. The entire laminate is installed in an anodized aluminum frame to provide structural strength and ease of installation.
Specifications for Kyocera KD135SX Solar Panel
| Max Rated Power (Pmax) |
135 Watts |
| Voltage at Max Power (Vmpp) |
17.7 |
| Current at Max Power (Impp) |
7.63 Amps |
| Open Circuit Voltage (Voc) |
22.1 |
| Short Circuit Current (Isc) |
8.02 Amps |
| Length x Width x Depth (inches) |
59.1 x 26.3 x 1.8 |
| Weight of Panel (Pounds) |
27.5 |
| Connector Cable Type or Junction Box |
Standard Junction Box |
| |
|
| This is a standard 12 volt panel |
