PentaMetric Three-Channel Battery Monitor System

Note: While extremely versatile, the Bogart PentaMetric system is a bit more complicated to set up than many other battery monitors. We suggest that you read over the information and instructions on the Manufacturers Website before purchasing to make sure that it is what you need. You can download the owners manual there also.

Shunts and wire are not included and must be ordered seperately. You will need from 1 to 3 shunts, depending on your setup.

PentaMetric Battery Monitor System for one or two battery banks.

The PentaMetric battery monitor system offers a lot more capability than the TriMetric and nearly all other battery monitors. It measures 1 or 2 battery systems with a common negative. With one battery system, battery current plus two charging sources/loads can be measured.

The Pentametric System consists of these components:

•  Data input unit (PM-5000-U) to collect, process and log data (near batteries)
•  Optional readout unit (shown in picture) with 2 line LCD display and control buttons. This connects to input unit with 4 wire cable up to 1000 feet away.
•  Optional computer interface (PM-100C) with software to control and read out all data.
  

Data may be accessed and controlled using either (or both) the optional LCD or the computer interface.