Surrette Deep Cycle Batteries for Renewable Energy Systems

Supplied in a Dual Non-Breakable Container (except S460 and S530), the new design eliminates breakage due to rough handling and abuse. Repairs are simpler and less time consuming. Short circuits from water, dirt, and falling metal objects are eliminated due to a moisture tight protective outer cover.

The new generation of batteries utilizes dual container construction. Each cell is assembled in its own inner container made of high temperature, durable polypropylene with the inner cover heat bonded to the container,(thus acid leakage is eliminated). The cells are then assembled into a high density tough polyethylene outer container with a removable lid. Even if the outer container were to break the battery would still be operable without the harmful affects of sulfuric acid spills.

Optional Cell Connection

Enveloped Positive Plates

The positive plates are doubled insulated. The first layer consists of a thick woven glass mat. The plate and matting are then sealed in a non-destructible, microporous, polyethylene envelope. The envelope eliminates the possibility of separator misalignment, cracked separators, treeing, or shorting at the bottom or sides. The sediment chamber is eliminated allowing more liquid space above the top of the cell, thus lengthening periods between watering.

Rugged Plate Construction

The Rezistox Plate Design uses fewer, but heavier, members in the grid (current carrying conductor). More metal where it counts. The heavier members offer more resistance to positive grid peroxidization (corrosion), and allow for greater percentage of power producing active material. (The grid and active material are referred to as the plate.)

Prices shown are for single batteries, quantity discounts are available for most.